January 2017

4 Weird Plumbing Noises And What They Mean

Few things are more frightening to homeowners than unexpected plumbing noises. These sound range from a slight, almost imperceptible humming to loud bangs and crashes. Following are four of the most common plumbing noises, what causes them, and what you should do when you hear them. 


If you hear a rattling sound immediately after turning on the faucet, this may mean that your plumping pipes aren’t connected properly. This condition is usually accompanied by uneven water flow. Tightening the pipe wraps usually does the trick. However, rattling can also be caused by superfluous air in the water pipes.Empty your water lines to remove any air that may be trapped. You can do this by shutting off the water at the main valve, turn on all faucets, water appliance, and flush toilets. The waste is flushed from the system when it stops coming out of the faucets. Turn the main valve back to the on position slowly.


The most probable cause of rumbling noises is that something is amiss with your water heater. Accumulations of sediment on the bottom of hot water heaters is what usually causes this particular noise. The trapped sediment causes conditions that create the water in your hot water heater to boil. Draining and cleaning the hot water heater will solve this problem, but be sure to leave it turned off for several hours prior to beginning the project — boiling hot water is dangerous to work with.

Repetitious Banging

If you hear a repetitive banging coming from your water pipes when you shut your faucet off, the culprit may be a condition called a water hammer. Water hammers happen when pressure bounced backwards into the pipes as a result of the stoppage of water flow. Flushing all water from the system as described above may eliminate the problem. If it doesn’t call a plumber near you immediately. Left unchecked, water hammers can cause significant damage to pipes.

Intermittent Banging


Intermittent banging sounds coming from your plumbing system is most likely the result of water pressure that is too high. Unlike the banging that occurs as a result of a water hammer, this happens when a faucet is turned on or an appliance such as a washing machine or dishwasher is in use. There should be a water pressure regulator located near your main water valve that you can adjust. If you don’t have a regulator, have your local plumbing contractor install one — water pressure that is too high wreaks havoc on pipes, appliances, and your utility bill. For more information, talk to a professional.


4 Warning Signs That Indicate You Need To Hire Plumbing Services For Pipe Repair

The pipes in your home that make up the plumbing system need to be well cared for since this is the start of your plumbing appliances working the way that they should. If there is any pipe damage, not only can it affect the appliance that it is attached to but also some other areas of plumbing in your home. Here are four warning signs that indicate you need to hire a professional for pipe repair:

  1. The Water Pressure Is Low: If the water pressure in any plumbing system in your home is much lower than it normally is, it could be that the pipes are leaking. You can check the exposed pipes. If there’s a leak, you may be able to seal it on your own. If you don’t see any leaks on the exposed pipes, you will need to hire a plumber to inspect the pipes in the wall. This way, they can seal or replace the pipes that are leaking. 
  2. The Water Is Contaminated: If the water is contaminated, it’s usually because the pipes are corroding. If you notice that the water is off in color or there are hard deposits in the water, you need to hire a professional to replace the corroded pipes. They can be dangerous for your family’s health. 
  3. The Plumbing Is Making Weird Noises: Weird noises that you don’t normally hear when you use plumbing fixtures in your home is always a sign that there is probably a problem with the pipes. Most of the time this happens when the pipes are old and there are obstructions in the pipes that make water flow less than smooth. You will want the entire piping system replaced because this means that all the pipes are old and outdated. You will notice, afterwards that your plumbing will start functioning much better at this point. 
  4. The Pipes Are Made of Cast Iron: Cast iron piping is outdated piping that should be carefully inspected and replaced as soon as possible. If you have recently purchased a home and the pipes are made of cast iron, you should hire professional plumbers to inspect them to determine whether or not they are still in the best working condition. If not, it’s better for long-term costs to just replace them instead of worrying about repairing them. 

When you know these four warning signs that indicate you need to hiring plumbing services for pipe repair, you can be sure that you are taking the right steps to ensuring that your entire plumbing system works efficiently in your home.